MCP14700T-E/SN Overview
In order to increase flexibility, the package 8-SOIC (0.154, 3.90mm Width) is used.Tape & Reel (TR) represents the packaging method.The configuration is supported by 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.In the absence of a 4.5V~5.5V supply voltage, its superiority can be demonstrated.There is a gate type of N-Channel MOSFET in this design.There is a temperature range for this device of -40°C~125°C TJ.Input type of Non-Inverting is used.The configuration starts with 8 terminations.Numerous related parts are available for its base part number MCP14700.Surface Mount is the way it takes to mount the device.The pins are configured with 8 when designing the chip.The device is specifically designed to operate at 5V volts.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 3.5A that can be achieved.There are various useful electronic components in its subcategory MOSFET Drivers.The board contains 8 pins for component connections.A boot strap voltage of 36V is the maximum possible high-side voltage.The power supply 5V of the product solves the power supply problem for a variety of applications.Mosfet gate drivers is recommended that you set the operating supply voltage to 5V.
MCP14700T-E/SN Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 36V
MCP14700T-E/SN Applications
There are a lot of Microchip Technology MCP14700T-E/SN gate drivers applications.
- Motor Drives
- Digitally controlled power supplies
- Welding
- High frequency line drivers
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Pulse transformer drivers
- Solar power supplies
- Broadcast equipment
- A/D drivers
- High-voltage isolated DC-DC converters
