MCP1318MT-29LE/OT Overview
A total of 5 terminals are used to mount this power management. Tape & Reel (TR)-packaging is used. In this IC power you will find 1 functions for you to refer to. This power management is made up of 1 channels which are available in a series format. Please refer to power management for SC-74A, SOT-753 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. IC management is specified that the package peak reflow temperature should be 260. During operation, the power ic is supplied with a voltage of 1. The power management is mounted by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 5 pins on IC management. There are 5 pins on the power managment ic. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. During operation, this power management system outputs Open Drain, Push-Pull. As far as the supply current of the power management is concerned, it is 10μA. It is always advisable to use MCP1318M, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature that PMIC chip can work with is 10μA.
MCP1318MT-29LE/OT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
10μA operating supply current
MCP1318MT-29LE/OT Applications
There are a lot of Microchip Technology MCP1318MT-29LE/OT Voltage Supervisors applications.
- Power distribution systems of operating room
- Computer applications
- FPGA design
- Important electronics for automotive protection
- Dash board
- Household appliances
- Network equipment
- Kitchen appliances
- Embedded computing
- Power communication system
