MCP1316MT-29KE/OT Overview
A total of 5 terminals are used to mount this power management. Packaged in the form of a Cut Tape (CT), power management is easy to use. Power management is possible to find a series of 1 functions. This power management is made up of 1 channels which are available in a series format. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. The supervisor is always powered by a 3V volt supply. In a 1 supply voltage, the PMIC chip conducts. Surface Mount is the one that mounts power management. Pin count of the power management is 5. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The recommended mounting type for IC management is Surface Mount. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. To find similar IC managements from the manufacturer, you can always search by MCP1316M. The maximum supply temperature is 10μA.
MCP1316MT-29KE/OT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
MCP1316MT-29KE/OT Applications
There are a lot of Microchip Technology MCP1316MT-29KE/OT Voltage Supervisors applications.
- Electronics installed in the vehicle
- Medical-specific insulation monitor
- Utility meter
- Dash board
- DC stabilized power supply module
- Network equipment
- Personal computers
- Detection of phase sequence
- Digitally controlled LDO regulators circuit
- Cloud computing
