MCP131-300E/TO Overview
It is mounted through 3 terminals on the power management. Bulk-packaging is used. To assist you, this IC power includes 1 functions. A series of 1 channels can be found on this supervisor. Please refer to power management for TO-226-3, TO-92-3 (TO-226AA) functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. During operation, the power ic is supplied with a voltage of 1. Through Hole is the one that mounts power management. A IC power such as this can be classified as a Power Management Circuits power management system. There are a total of 3 pins on power management. 3 pins are on the supervisor. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management recommends the Through Hole mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 90μA. It is always advisable to use MCP131, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature that PMIC chip can work with is 90μA.
MCP131-300E/TO Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
90μA operating supply current
MCP131-300E/TO Applications
There are a lot of Microchip Technology MCP131-300E/TO Voltage Supervisors applications.
- Battery-powered equipment
- Insulation fault location system
- Smart meter
- Radio
- Electrical fire monitoring system
- Battery cars
- Kitchen appliances
- Military communications
- Consumer electronics
- Microprocessor system
