MCP130-485FI/TO Overview
There are 3 terminals connected to this power management, which makes it easy to mount. There is a Bulk-packaging method applied to IC management. To assist you, this IC power includes 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please refer to power management for TO-226-3, TO-92-3 (TO-226AA) functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. In a 5V supply voltage, the power management conducts. In a 1 supply voltage, the PMIC chip conducts. Power management is included in the Through Hole mount. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 3 pins on IC management. There are 3 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type is Through Hole. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. The power management's supply current is 60μA. You can always use MCP130, the base supervisor number, to search for similar PMICs of the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 60μA.
MCP130-485FI/TO Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
MCP130-485FI/TO Applications
There are a lot of Microchip Technology MCP130-485FI/TO Voltage Supervisors applications.
- Set top box
- Linux and server computing
- Insulation fault location system
- Radio
- Solar power charger
- Medical-specific isolation transformer
- Efficient information transmission
- Detection of phase imbalance
- Sensitive sensors
- Unattended substation automation
