MCP130-270HI/TO Overview
It is mounted through 3 terminals on the power management. This power ic is packaged in a way that looks like a Bulk. In this IC power you will find 1 functions for you to refer to. A series of 1 channels can be found on this supervisor. To assist you, this PMIC includes TO-226-3, TO-92-3 (TO-226AA) functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. When a supply voltage of 5V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. Through Hole mounts IC management. A IC power such as this can be classified as a Power Management Circuits power management system. A total of 3 pins are located on this power management. There are 3 pins on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Through Hole is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. Supplied with a operating current of 60μA, this PMIC is capable of fully function as specified. For similar manage ics search of the manufacturer, you can always refer to MCP130, the base PMIC number. At most, voltage supervisor can operate at a supply temperature of 60μA.
MCP130-270HI/TO Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
MCP130-270HI/TO Applications
There are a lot of Microchip Technology MCP130-270HI/TO Voltage Supervisors applications.
- Satellite navigation
- Microprocessor system
- DVR
- Set top box
- Radar
- Fire equipment power monitoring system
- Detection of phase imbalance
- emergency room
- Digitally controlled LDO regulators circuit
- Efficient information transmission
