Name: MCP120-475DI/TO
Brand: Microchip Technology
SKU: MCP120-475DI/TO
Price: 0.60000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	TO-226-3, TO-92-3 (TO-226AA)
Number of Pins	3
Operating Temperature	-40°C~85°C TA
Packaging	Bulk
Published	1998
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	3
ECCN Code	EAR99
Type	Simple Reset/Power-On Reset
Terminal Finish	Matte Tin (Sn)
Subcategory	Power Management Circuits
Technology	CMOS
Terminal Position	BOTTOM
Number of Functions	1
Supply Voltage	5V
Base Part Number	MCP120
Output	Open Drain or Open Collector
Pin Count	3
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1V
Operating Supply Current	60μA
Nominal Supply Current	60μA
Max Supply Current	60μA
Adjustable Threshold	NO
Quiescent Current	45μA
Watchdog Timer	No
Reset	Active Low
Voltage - Threshold	4.625V
Number of Voltages Monitored	1
Reset Timeout	150ms Minimum
Min Reset Threshold Voltage	4.5V
Max Reset Threshold Voltage	4.75V
Threshold Voltage	+4.63V
Undervoltage Threshold	4.5V
Overvoltage Threshold	4.75V
Height	4.95mm
Length	4.95mm
Width	3.94mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MCP120-475DI/TO Product Details

MCP120-475DI/TO Overview

A total of 3 terminals are used to mount this power management. In terms of packaging, power management follows the Bulk model. As a reference, this IC management includes 1 functions for your convenience. A series of 1 channels can be found on this supervisor. In this IC management you will find TO-226-3, TO-92-3 (TO-226AA) functions for you to refer to. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Manage ics operate at 5V supply voltages. Power management conducts at a voltage of 1. The mount is attached to Through Hole. Power Management Circuits is a subcategory of this PMIC chip. A total of 3 pins are located on this power management. The pins of the power management system count 3. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. A Through Hole mounting type is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. Supplied with a operating current of 60μA, this PMIC is capable of fully function as specified. For similar manage ics search of the manufacturer, you can always refer to MCP120, the base PMIC number. The power management can work with a maximum supply temperature of 60μA.