MCP120-270GI/TO Overview
There are 3 terminals on this power management that allow it to be mounted. A Bulk package is used to package the power management. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. In this PMIC, you can find TO-226-3, TO-92-3 (TO-226AA) functions for your reference. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. When 5V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. Through Hole mounts power management on the wall. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 3 pins. This power management has 3 pins. IC management can only work with a supply voltage of 1V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Through Hole mounting is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. During operation, this power management system outputs Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 60μA. It is always advisable to use MCP120, the base supervisor number, when searching for similar PMICs from the manufacturer. At the most, voltage supervisor can work with a supply temperature of 60μA.
MCP120-270GI/TO Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
MCP120-270GI/TO Applications
There are a lot of Microchip Technology MCP120-270GI/TO Voltage Supervisors applications.
- Battery cars
- Leakage protection
- Battery-powered equipment
- DVR
- FPGA design
- Important electronics for automotive safety
- Radio
- Digitally controlled LDO regulators circuit
- Rechargeable batteries
- Computer applications
