MCP112T-290E/TT Overview
Power management is mounted through 3 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 1 channels that can be found. To assist you, this PMIC includes TO-236-3, SC-59, SOT-23-3 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Packages are specified to have an average peak reflow temperature of 260. Power management conducts at a voltage of 1. The power management is mounted by a Surface Mount-axis. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 3 pins on IC management. The pins of the power management system count 3. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Surface Mount. This range of temperature should be set for the supervisors: -40°C~125°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. There is a 1.75μA supply current present in the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to MCP112, which is the base power ics number. At the most, voltage supervisor can work with a supply temperature of 1.75μA.
MCP112T-290E/TT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP112T-290E/TT Applications
There are a lot of Microchip Technology MCP112T-290E/TT Voltage Supervisors applications.
- External alarm
- Military communications
- Digitally controlled LDO regulators circuit
- Power distribution systems of ICU
- Microcontroller system
- Battery cars
- Embedded computing
- Analog circuit
- Detection of phase sequence
- Insulation fault location system
