MCP112T-195I/MB Overview
A total of 3 terminals are used to mount this power management. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please find attached 1 functions for your reference in this IC power. This power managment ic consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of TO-243AA functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is provided by Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, the power management has 3 pins in it. Power managment ic pin count is 3. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). In this case, Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. There is a 1.75μA supply current present in the power management. You can always use MCP112, the base supervisor number, to search for similar PMICs of the manufacturer. At the most, voltage supervisor can work with a supply temperature of 1.75μA.
MCP112T-195I/MB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP112T-195I/MB Applications
There are a lot of Microchip Technology MCP112T-195I/MB Voltage Supervisors applications.
- Leakage current detection
- Utility meter
- Military communications
- Microcontroller system
- Analog circuit
- Computer applications
- Battery cars
- Magnetic resonance imaging
- Power distribution systems of CCU
- Radar
