MCP112-315E/TO Overview
As you can see, this power management is mounted through 3 terminals. Packaged in the form of a Bulk, power management is easy to use. To assist you, this IC power includes 1 functions. On this supervisor, there is a series of 1 channels that can be found. To assist you, this PMIC includes TO-226-3, TO-92-3 (TO-226AA) functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. A supply voltage of 1 is used to conduct the PMIC chip. By Through Hole, IC management has been mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. Power management has a total of 3 pins. 3 pins are present on the power management system. It is recommended that Vsup should not be less than 1V for this IC power. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Through Hole is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~125°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. The power management's supply current is 1.75μA. To find similar IC managements from the manufacturer, you can always search by MCP112. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.75μA.
MCP112-315E/TO Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP112-315E/TO Applications
There are a lot of Microchip Technology MCP112-315E/TO Voltage Supervisors applications.
- Solar power charger
- Set top box
- Automotive permanent magnet synchronous motors
- Efficient information transmission
- Leakage current detection
- Power distribution systems of infant care room
- Multi-voltage system
- Smartphones
- Automotive power systems
- Power distribution systems of operating room
