MCP112-290E/TO Overview
Power management is mounted through 3 terminals. Packaged in a Bulk-shape, IC management comes with a number of features. Please refer to this PMIC for 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. IC management is packaged as a TO-226-3, TO-92-3 (TO-226AA) package. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. IC management is possible to find a succession of 1 voltages that have been checked. By Through Hole, IC management has been mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 3 pins on the board. 3 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Through Hole. We recommend setting the supervisors to -40°C~125°C TA degrees. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 1.75μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using MCP112, the base power ics number. Voltage supervisor can work with a supply temperature of 1.75μA at the most.
MCP112-290E/TO Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP112-290E/TO Applications
There are a lot of Microchip Technology MCP112-290E/TO Voltage Supervisors applications.
- Important electronics for automotive protection
- Digitally controlled LDO regulators circuit
- Microprocessor system
- Display equipment
- External alarm
- FPGA design
- Smartphones
- Automotive power systems
- Fire equipment power monitoring system
- Battery cars
