MCP112-195I/TO Overview
This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. This power ic is packaged in a way that looks like a Bulk. Power management is possible to find a series of 1 functions. This power management is made up of 1 channels which are available in a series format. Please refer to power management for TO-226-3, TO-92-3 (TO-226AA) functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Power management conducts at a voltage of 1. Using Through Hole, IC management is mounted. There is a subcategory called Power Management Circuits for this power management. 3 pins are present in total in this power management. There are 3 pins on the power managment ic. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The mounting type of the supervisors is Through HoleTemperature setting for the supervisors should be -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. The supervisor's supply current is specified to 1.75μA. To find similar IC managements from the manufacturer, you can always search by MCP112. The power management can work with a maximum supply temperature of 1.75μA.
MCP112-195I/TO Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP112-195I/TO Applications
There are a lot of Microchip Technology MCP112-195I/TO Voltage Supervisors applications.
- Kitchen appliances
- Smart meter
- Satellite navigation
- Electronics installed in the vehicle
- Detection of phase sequence
- Power distribution systems of CCU
- Household appliances
- Detection of phase loss
- Precision measurement
- Leakage current detection
