MCP111T-240E/LB Overview
It is mounted through 3 terminals on the power management. Power management is packaged in a Tape & Reel (TR) way. Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. Please find attached SC-70, SOT-323 functions for your reference in this IC power. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When 1 is applied to the power ic, it conducts. The mount is provided by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 3 pins. There are 3 pins on the supervisor. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. For this power management, there is an 1.75μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to MCP111, which is the base power ics number. The maximum supply temperature that PMIC chip can work with is 1.75μA.
MCP111T-240E/LB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP111T-240E/LB Applications
There are a lot of Microchip Technology MCP111T-240E/LB Voltage Supervisors applications.
- Functional modules
- Leakage current detection
- Battery cars
- Utility meter
- Medical-specific insulation monitor
- Network equipment
- External alarm
- Precision measurement
- Smart meter
- Power distribution systems of infant care room
