MCP111-315E/TO Overview
There are 3 terminals connected to this power management, which makes it easy to mount. Bulk-packaging is used. Please refer to this PMIC for 1 functions. A series of 1 channels can be found on this supervisor. Please refer to power management for TO-226-3, TO-92-3 (TO-226AA) functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is provided by Through Hole. The power management system can be categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 3. There are 3 pins on the power managment ic. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Through Hole type of mounting. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. There is a supply current of 1.75μA for the power management. You can always use MCP111, the base supervisor number, to search for similar PMICs of the manufacturer. The power management can work with a maximum supply temperature of 1.75μA.
MCP111-315E/TO Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP111-315E/TO Applications
There are a lot of Microchip Technology MCP111-315E/TO Voltage Supervisors applications.
- Smart meter
- Efficient information transmission
- Military electronics
- Fire equipment power monitoring system
- Precision measurement
- Electrical fire monitoring system
- Insulation fault location system
- Detection of phase imbalance
- Smartphones
- DSP
