MCP111-300E/TO Overview
This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. Packaged in a Bulk-shape, IC management comes with a number of features. For your reference, this IC power includes a list of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. In this IC management you will find TO-226-3, TO-92-3 (TO-226AA) functions for you to refer to. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. IC management is possible to find a succession of 1 voltages that have been checked. The mount is attached to Through Hole. The power management belongs to the Power Management Circuits subcategory. In total, IC powers are 3 pins on the board. Pin count of the power management is 3. IC management can only work with a supply voltage of 1V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Through Hole mounting is recommended. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. For this power management, there is an 1.75μA volt supply current. To find similar IC managements from the manufacturer, you can always search by MCP111. At the most, voltage supervisor can work with a supply temperature of 1.75μA.
MCP111-300E/TO Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP111-300E/TO Applications
There are a lot of Microchip Technology MCP111-300E/TO Voltage Supervisors applications.
- Power distribution systems of CCU
- Electric heating appliances
- Smartphones
- Detection of phase imbalance
- DC stabilized power supply module
- Important electronics for automotive protection
- DSP
- Fire equipment power monitoring system
- Leakage current detection
- External alarm
