MCP102T-450E/TT Overview
As you can see, this power management is mounted through 3 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. Please refer to this PMIC for 1 functions. A series of 1 channels can be found on this supervisor. In this PMIC, you can find TO-236-3, SC-59, SOT-23-3 functions for your reference. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount is the one that mounts power management. Power Management Circuits is a subcategory of this PMIC chip. There are a total of 3 pins on power management. 3 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. The power management's supply current is 1.75μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MCP102, which is the base power ics number. A maximum supply temperature of 1.75μA can be used.
MCP102T-450E/TT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP102T-450E/TT Applications
There are a lot of Microchip Technology MCP102T-450E/TT Voltage Supervisors applications.
- Important electronics for automotive protection
- Medical-specific isolation transformer
- Set top box
- Detection of phase imbalance
- Leakage current detection
- Precision measurement
- DSP
- Battery cars
- Refrigeration
- FPGA design
