Name: LMC7101BYM5-TR
Brand: Microchip Technology
SKU: LMC7101BYM5-TR
Price: 0.63000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	10 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SC-74A, SOT-753
Number of Pins	5
Supplier Device Package	SOT-23-5
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Published	2005
Series	IttyBitty®
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Base Part Number	LMC7101
Output Type	Rail-to-Rail
Number of Elements	1
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Operating Supply Current	800μA
Nominal Supply Current	1.71mA
Current - Supply	800μA
Slew Rate	0.3V/μs
Amplifier Type	General Purpose
Common Mode Rejection Ratio	65 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	2.7V~12V ±1.35V~6V
Output Current per Channel	300mA
Input Offset Voltage (Vos)	110μV
Bandwidth	500 kHz
Gain Bandwidth Product	500kHz
Power Supply Rejection Ratio (PSRR)	65dB
Voltage - Input Offset	110μV
Current - Output / Channel	300mA
Max Junction Temperature (Tj)	125°C
Ambient Temperature Range High	85°C
Number of Amplifiers	1
Height	1.45mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

LMC7101BYM5-TR Product Details

LMC7101BYM5-TR Overview

A SC-74A, SOT-753 case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. There are 5 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 110μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . An 800μA volt supply current is needed for this linear amplifier to operate. On this instrumentation amplifier, there are 1 circuits that are connected together. There are 1 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. In order for op amp to function properly, the temperature should not be lower than -40°C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 85°C. There are a total of 1 elements in this linear amplifier. As a recommendation, this electronic component should be used with a power supply that can deliver 800μA. I would like to point out that this electrical component is capable of working from a voltage below 12V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 2.7V at all times. The IttyBitty® indicates the series number of the op amp. In total, there are 1 op amps on the device.