HCS410-I/SN Overview
The ICs is enclosed in the package 8-SOIC (0.154, 3.90mm Width).This module is included in a package named Tube.A mounting method of Surface Mount is used.This type of Code Hopping Encoder and Transponder can be found in many integrated circuits.The family HCS410 contains similar integrated circuit systems.Access Control Systems is the appropriate place to apply the ICs.In total, there are 8 terminations on the ICs solutions.8 pins are available on the ICs applications.This logic gate IC should be run at 3V.Ideally, it would be best to mount this ICs application by Surface Mount.In order to make the most of it, it is recommended to use it when the integrated circuit chip's temperature is below 85°C.It is not recommended to operate the integrated circuit system below -40°C operating temperature.There are a total of 8 pins on integrated circuit chip.It is part of the KEELOQ? series of electrical ICs applications.Supply voltages as low as 6.6V are possible for this integrated circuit.This integrated circuit needs a voltage not less than 2V.The supply current for this IC integrated circuit is 2.2mA.
HCS410-I/SN Features
Applications : Access Control Systems
It belongs to KEELOQ? Series
Operating Supply Current at 2.2mA
HCS410-I/SN Applications
There are a lot of Microchip Technology HCS410-I/SN Specialized ICs applications.
- All AC-DC converters with X capacitors of 100 nF up to 6 mF
- Portable Instruments
- Printer Cartridge Identification and Authentication
- Lossless generation of zero crossing signal
- Appliances requiring ErP Lot 6 compliance
- Membrane Keypads
- Authentication of Medical Sensors and Tools
- PDAs and Palmtop Devices
- Industrial Instruments
- Cell Phones
