HCS370T-I/ST Overview
Integrated circuit is enclosed in a package 14-TSSOP (0.173, 4.40mm Width).The Tape & Reel (TR) package contains integrated circuit.The mounting method is Surface Mount.This type of Code Hopping Encoder can be found in many integrated circuits.Using the HCS370 family, similar integrated circuit systems can be found.Putting the ICs in Remote Secure Access, Keyless Entry is appropriate.This ICs solutions has 14 terminations.In this ICs applications, there are 14 pins that are available for use.3.5V should be the operating point for this logic gate IC.In order to make this ICs application work properly, it should be mounted at Surface Mount.It should be used at integrated circuit chip's temperatures below 85°C to maximize its performance.No operating temperature lower than -40°C should be used for the integrated circuit system.14 pins are on integrated circuit chip in total.This electrical ICs application is part of the KEELOQ? series.In this integrated circuit, the supply voltage can be set to 5.5V.For this integrated circuit, the supply voltage should not be less than 2.05V.A 1mA supply current can be used with this IC integrated circuit .
HCS370T-I/ST Features
Applications : Remote Secure Access, Keyless Entry
It belongs to KEELOQ? Series
Operating Supply Current at 1mA
HCS370T-I/ST Applications
There are a lot of Microchip Technology HCS370T-I/ST Specialized ICs applications.
- Isolated CAN Bus Interface
- Membrane Keypads
- Industrial Instruments
- Adapters requiring ultra low no-load consumption
- Printer Cartridge Identification and Authentication
- Portable Instruments
- Secure Management of Limited Use Consumables
- Anti-cloning
- Cell Phones
- DeviceNet Applications
