HCS300T-I/SN Overview
8-SOIC (0.154, 3.90mm Width) is the package that contains the ICs.The Tape & Reel (TR) package contains integrated circuit.Surface Mount is used to mount integrated circuit.The Code Hopping Encoder is available in a wide range of integrated circuits.Similar integrated circuit systems can be found by searching for the HCS300 family.It is appropriate to apply the ICs to Remote Secure Access, Keyless Entry.The ICs solutions has a total of 8 terminations.As far as the ICs applications is concerned, there are 8 pins available.There should be 5V voltage applied to this logic gate IC.This ICs application should be mounted by Surface Mount.Using it when the integrated circuit chip's temperature is below 85°C is recommended.Operating temperatures should not be lower than -40°C.There are a total of 8 pins on integrated circuit chip.I would like to point out that this electrical ICs application belongs to the series KEELOQ?.At 6.6V supply voltage, this integrated circuit is capable of operating.The supply voltage for this integrated circuit should not be less than -300mV.A maximum supply current of 1.4mA is set.This IC integrated circuit can run at 1mA supply current.
HCS300T-I/SN Features
Applications : Remote Secure Access, Keyless Entry
It belongs to KEELOQ? Series
Operating Supply Current at 1mA
HCS300T-I/SN Applications
There are a lot of Microchip Technology HCS300T-I/SN Specialized ICs applications.
- Digital Still Cameras
- Peripheral Authentication
- Industrial Instruments
- Cell Phones
- Industrial Networks
- Ecosystem Control
- All AC-DC converters with X capacitors of 100 nF up to 6 mF
- Reference Design License Management
- Lossless generation of zero crossing signal
- All converters requiring very low standby power
