HCS300-I/P Overview
The ICs is enclosed in the package 8-DIP (0.300, 7.62mm).The package Tube contains integrated circuit.Through Hole is the way in which integrated circuit is mounted.The Code Hopping Encoder is available in a wide range of integrated circuits.Similar integrated circuit systems can be found by searching for the HCS300 family.Putting the ICs in Remote Secure Access, Keyless Entry is appropriate.This ICs solutions has 8 terminations.In the ICs applications, there are 8 pins.This logic gate IC should be run at 5V.Through Hole is recommended for mounting this ICs application.The integrated circuit chip's temperature should not be higher than 85°C when you use it.No operating temperature lower than -40°C should be used for the integrated circuit system.There are a total of 8 pins on integrated circuit chip.It belongs to the KEELOQ? series of electrical ICs applications.Supply voltages as low as 6.6V are possible for this integrated circuit.The supply voltage for this integrated circuit should not be less than -300mV.1.4mA is integrated circuits maximum supply current.It is possible for this IC integrated circuit to run at a supply current of 1mA.
HCS300-I/P Features
Applications : Remote Secure Access, Keyless Entry
It belongs to KEELOQ? Series
Operating Supply Current at 1mA
HCS300-I/P Applications
There are a lot of Microchip Technology HCS300-I/P Specialized ICs applications.
- Message Security
- Reference Design License Management
- Appliances requiring ErP Lot 6 compliance
- DeviceNet Applications
- Adapters requiring ultra low no-load consumption
- Membrane Keypads
- MP3 Players
- Isolated CAN Bus Interface
- Digital Still Cameras
- Secure Download and Boot
