HCS200/P Overview
8-DIP (0.300, 7.62mm) encloses the ICs.Contains this module is the package Tube.A mounting method of Through Hole is used.There are a variety of integrated circuits for this type of Code Hopping Encoder.In order to find similar integrated circuit systems, you should search for the family HCS200.It is appropriate to apply the ICs to Remote Secure Access, Keyless Entry.ICs solutions terminations total 8.In this ICs applications, there are 8 pins available.5V is the correct setting for this logic gate IC.In order to make this ICs application work properly, it should be mounted at Through Hole.In order to make the most of it, it is recommended to use it when the integrated circuit chip's temperature is below 70°C.integrated circuit systems shouldn't be operated below 0°C operating temperature.8 pins are on integrated circuit chip in total.I would like to point out that this electrical ICs application belongs to the series KEELOQ?.The integrated circuit can operate at a supply voltage of 13V.There should be no voltage lower than 3.5V for this integrated circuit.There is a possibility that this IC integrated circuit will run on a supply current of 800μA.
HCS200/P Features
Applications : Remote Secure Access, Keyless Entry
It belongs to KEELOQ? Series
Operating Supply Current at 800μA
HCS200/P Applications
There are a lot of Microchip Technology HCS200/P Specialized ICs applications.
- Adapters requiring ultra low no-load consumption
- PC-Based Instruments
- Anti-cloning
- Cell Phones
- Isolated CAN Bus Interface
- Peripheral Authentication
- Industrial Networks
- MP3 Players
- DeviceNet Applications
- μP Switch Interfacing
