ATF750C-10PU Overview
Currently, there are 10 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.It is embedded in the 24-DIP (0.300, 7.62mm) package.It is equipped with 10I/O ports.It is programmed to terminate devices at [0].This electrical part has a terminal position of DUALand is connected to the ground.The device is powered by a voltage of 5V volts.It is a part of the family [0].It is recommended to package the chip by Tube.The temperature at which it operates is set to -40°C~85°C TAin order to ensure its reliability.It is mounted in the way of Through Hole.In FPGA terms, it is a type of ATF750C(L)series FPGA.This device also displays [0].The ATF750indicates that related parts can be found.750gates are used to construct digital circuits.In order to achieve high efficiency, the supply voltage should be maintained at [0].It is recommended to store data in [0].Through Holeis the mounting point of this electronic part.A total of 24pins are provided on this board.A maximum supply voltage of 5.5Vis used in its operation.Normally, it operates with a voltage of 4.5VV as its minimum supply voltage.It runs on a voltage of 5Vvolts.It is possible to achieve a frequency of 90MHz.To detect the status of input signals, there are 11dedicated inputs.
ATF750C-10PU Features
24-DIP (0.300, 7.62mm) package
10 I/Os
The operating temperature of -40°C~85°C TA
24 pins
5V power supplies
ATF750C-10PU Applications
There are a lot of Microchip Technology ATF750C-10PU CPLDs applications.
- State machine control
- Digital systems
- Custom state machines
- STANDARD SERIAL INTERFACE UART
- Bootloaders for FPGAs
- USB Bus
- ToR/Aggregation/Core Switch and Router
- White goods (Washing, Cold, Aircon ,...)
- Digital multiplexers
- Power Meter SMPS
