Name: ATA6831C-PIQW-1
Brand: Microchip Technology
SKU: ATA6831C-PIQW-1
Availability: InStock

new-10%

ATA6831C-PIQW-1

Manufacturer part number:ATA6831C-PIQW-1

Manufacturer:Microchip Technology

Description:Tape & Reel (TR) 18-VFQFN Exposed Pad PWM, SPI 4.75V~5.25V Surface Mount -40°C~150°C TJ Bulbs, DC Motors, Resistors Half Bridge (3) Inductive, Capacitive, Resistive 5.6V~40V

Case Package:SOT-23

Datasheet:ATA6831C-PIQW-1 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	10 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	18-VFQFN Exposed Pad
Surface Mount	YES
Supplier Device Package	18-QFN (4x4)
Number of Terminals	18
Supplier Package	QFN
Typical Operating Supply Voltage	5 V
Minimum Operating Supply Voltage	4.75 V
Input Logic Compatibility	5V/CMOS
Peak Output Current	1 A
Driver Type	High and Low Side
Maximum Operating Supply Voltage	5.25 V
Bridge Type	Half Bridge
Mounting	Surface Mount
Package	Tape & Reel (TR);Cut Tape (CT);Digi-Reel®;
Base Product Number	ATA6831
Mfr	Microchip Technology
Product Status	Active
Package Shape	SQUARE
Manufacturer	Microchip Technology Inc
Operating Temperature	-40°C~150°C TJ
Packaging	Tape & Reel (TR)
Published	2002
Series	--
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	18
Applications	Bulbs, DC Motors, Resistors
Voltage - Supply	4.75V~5.25V
Terminal Position	QUAD
Terminal Form	NO LEAD
Number of Functions	1
Terminal Pitch	0.5mm
Reach Compliance Code	compliant
Base Part Number	ATA6831C
Pin Count	18
JESD-30 Code	S-PQCC-N18
Number of Outputs	3
Operating Frequency	2000 kHz
Max Output Current	1A
Supply Voltage-Max (Vsup)	40V
Temperature Grade	AUTOMOTIVE
Supply Voltage-Min (Vsup)	7.5V
Interface	PWM, SPI
Analog IC - Other Type	BRUSH DC MOTOR CONTROLLER
Output Configuration	Half Bridge (3)
Max Supply Current	650μA
Output Current-Max	1 A
Output Current per Channel	1A
Seated Height-Max	0.9 mm
Supply Current-Max (Isup)	6 mA
Voltage - Load	5.6V~40V
Current - Output / Channel	1A
Fault Protection	Open Load Detect, Over Temperature, Short Circuit, UVLO
Screening Level	Automotive
Number of Drivers	3
Rds On (Typ)	800m Ω LS, 800m Ω HS
Current - Peak Output	--
Load Type	Inductive, Capacitive, Resistive
Features	--
Length	4mm
Height Seated (Max)	0.9mm
Width	4mm
RoHS Status	ROHS3 Compliant

ATA6831C-PIQW-1 Product Details

ATA6831C-PIQW-1 Overview

H bridge is packaged using Tape & Reel (TR).H bridge is provided in the 18-VFQFN Exposed Pad package for the sake of cost savings.Improved reliabilbridge drivery can be ensured based on the supply voltage of 4.75V~5.25V.H bridge circuit is mounted in the way of Surface Mount.The operating temperature of -40°C~150°C TJ enables motor driver H bridge to work normally.H bridge motor driver is pretty useful in a wide range of applications, including Bulbs, DC Motors, Resistors.Surface Mount is adopted as a technique to mount H gate on the PCB.There are 18 terminations used to end a transmission line with the H bridge that matches the characteristic impedance of the line.Its base H bridge ic number of ATA6831C is the basis to find more related H bridge ics.H bridge circuit is incorporated with BRUSH DC MOTOR CONTROLLER as its analog IC type.It is a kind of electronic H-bridge belonging to the -- series.The maximum load current that power supply can provide at a specified ambient temperature reaches 1A.The maximum amount of current which output reaches --.18 pins are work together to help this bridge driver play its specific functions.It is equipped with 3 outputs.3 drivers are inegrated in the system.