AT93C66A-10PU-1.8 Overview
Non-Volatile is its memory type. It is supplied votage within Tube. Embedded in the 8-DIP (0.300, 7.62mm) case, memory ics is a single file. There is 4Kb 512 x 8 256 x 16 of memory on the chip. EEPROM-format memory is used in this device, which is a mainstream design. -40°C~85°C TA is an extended operating temperature range, making this device ideal for demanding applications. A voltage of 1.8V~5.5V can be supplied to memory ics. It is recommended that the mounting type be Through Hole. It has a clock frequency of 2MHz. To select similar parts, many people use the device's base part number AT93C66A. An 8-pin package is used to package this memory device. There is a note stating that this memory chip operates at 5V. This chip uses Through Hole mounting, a straightforward, high-efficiency method of mounting. In terms of its nominal supply current, this memory component is rated at 2mA. In order for this device to function properly, its operating temperature must not be less than -40°C. The part should not be operated at temperatures above 85°C degrees Celsius as otherwise, the part may be damaged due to the excessive amount of heat. In order for this part to work properly, there must be a minimum voltage supply of 1.8V volts. In order for it to operate properly, its voltage should not exceed 5.5V. The frequency of data processing on this memory chip is 2MHz. There is a maximum frequency of up to 250kHz for this memory.
AT93C66A-10PU-1.8 Features
Package / Case: 8-DIP (0.300, 7.62mm)
8 Pins
Operating Supply Voltage:5V
Freguency at 2MHz
2MHz terminals
AT93C66A-10PU-1.8 Applications
There are a lot of Microchip Technology AT93C66A-10PU-1.8 Memory applications.
- embedded logic
- eDRAM
- hard disk drive (HDD)
- multimedia computers
- printers
- cell phones
- Cache memory
- networks
- graphics card
- servers
