AT28HC256E-12TU Overview
Its memory type can be classified as Non-Volatile. There is a Tray case available. It is available in 28-TSSOP (0.465, 11.80mm Width) case. Memory size on the chip is 256Kb 32K x 8. This device uses a EEPROM-format memory, which is of mainstream design. Due to its wide operating temperature range, this device can be used in a wide variety of demanding applications. The supply voltage can be up to 4.5V~5.5V. The recommended mounting type for memory ics is Surface Mount. A total of 28 terminations have been planted on the chip. For a comprehensive working procedure, this part supports as many as 1 functions. An 5V supply is required for this ic memory chip to operate properly. A device's base part number, AT28HC256, is often used in order to identify similar components. The memory device has an 28-pin package, which encloses it in a small package. There is a note stating that this memory chip operates at 5V. In this chip, Surface Mount mounting is used, a straightforward, high-efficiency mounting method. There is a nominal supply current rating of 80mA for this memory component. There is only a single power supply required for this memory chip. 5V programming voltage is required to change the state of certain nonvolatile memory arrays.
AT28HC256E-12TU Features
Package / Case: 28-TSSOP (0.465, 11.80mm Width)
28 Pins
Operating Supply Voltage:5V
AT28HC256E-12TU Applications
There are a lot of Microchip Technology AT28HC256E-12TU Memory applications.
- DVD disk buffer
- personal digital assistants
- eSRAM
- workstations,
- nonvolatile BIOS memory
- embedded logic
- mainframes
- supercomputers
- hard disk drive (HDD)
- Cache memory
