AT27C010-70PU Overview
A Non-Volatile-type memory can be classified as the memory type of this device. It is available in a case with a Tube shape. 32-DIP (0.600, 15.24mm) case encloses it. There is an 1Mb 128K x 8 memory capacity on the chip. This device uses a EPROM-format memory, which is of mainstream design. Due to its wide operating temperature range, this device can be used in a wide variety of demanding applications. The device is capable of handling a supply voltage of 4.5V~5.5V volts. It is recommended that the mounting type be Through Hole. On the chip, there are 32 terminations that are planted. As many as 1 functions are supported for comprehensive working. There is a requirement for 5V to be supplied to this ic memory chip in order to operate. A device's base part number, AT27C010, is often used in order to identify similar components. The memory device has an 32-pin package, which encloses it in a small package. There is a note indicating that this memory chip operates at an 5V volt supply voltage. This chip is configured to use Through Hole mounting, a straight forward, high-efficiency mounting fashion. In terms of its nominal supply current, this memory component has a rating of 25mA. There is only a single power supply required for this memory chip. A memory mapped I/O port address of COMMON bits is used in this device. Usually, this memory ics falls under the OTP ROMs component category. In this memory chip, data is processed at a frequency of 70GHz. It should be noted that the chip works well at voltages greater than 7V volts. Optimal supply current for this device is 100μA amps.
AT27C010-70PU Features
Package / Case: 32-DIP (0.600, 15.24mm)
32 Pins
Operating Supply Voltage:5V
I/O Type: COMMON
Freguency at 70GHz
70GHz terminals
AT27C010-70PU Applications
There are a lot of Microchip Technology AT27C010-70PU Memory applications.
