AT25160AN-10SU-2.7 Overview
A Non-Volatile-type memory can be classified as the memory type of this device. The case comes in the Tube style. There is a 8-SOIC (0.154, 3.90mm Width) case embedded in it. There is 16Kb 2K x 8 of memory on the chip. There is a EEPROM-format memory used in this device, which is the memory format used by mainstream devices. This device has an extended operating temperature range of -40°C~85°C TA, so it's perfect for a wide range of demanding applications. It is capable of handling a voltage supply of 2.7V~5.5V. There is a recommended mounting type of Surface Mount for it. With a clock frequency of 20MHz, the memory rotates on its own. When selecting similar parts for the ic memory chip, AT25160 is often referred to. The memory device is enclosed in a package with an 8-pin connector. There is a note stating that this memory chip operates at 5V. In this chip, the Surface Mount mounting method is used, a straightforward, high-efficiency mounting method. As far as its nominal supply current is concerned, this memory component carries a rating of 10mA. There must be at least an -40°C operating temperature for this device. A temperature of no more than 85°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. It is recommended that this part be supplied with at least 2.7V volts. This part requires a minimum voltage of 5.5V. A ic memory chip like this one processes data at a frequency of 20MHz bits per second. It is possible to run this memory at a maximum frequency of up to 10MHz.
AT25160AN-10SU-2.7 Features
Package / Case: 8-SOIC (0.154, 3.90mm Width)
8 Pins
Operating Supply Voltage:5V
Freguency at 20MHz
20MHz terminals
AT25160AN-10SU-2.7 Applications
There are a lot of Microchip Technology AT25160AN-10SU-2.7 Memory applications.
- eDRAM
- networks
- main computer memory
- eSRAM
- supercomputers
- Cache memory
- hard disk drive (HDD)
- Camcorders
- cell phones
- networking
