AT24C64C-TH-B Overview
A Non-Volatile-type memory can be classified as the memory type of this device. It comes in a Tube. There is a 8-TSSOP (0.173, 4.40mm Width) case embedded in it. A memory chip with a capacity of 64Kb 8K x 8 is used on this device. EEPROM-format memory is used in this device, which is a mainstream design. Featuring an extended operating temperature range of -40°C~85°C TA, this device allows it to be used in a variety of demanding applications. A voltage of 1.8V~5.5V can be supplied to memory ics. There is a recommendation that Surface Mount mounting type should be used for this product. With a clock frequency of 1MHz, the memory rotates on its own. Similar parts are frequently selected using AT24C64, the device's base part number. A package of 8 pins is used to protect this memory device. A voltage of 3.6V is noted as the operating supply voltage for this memory. This chip is configured to use Surface Mount mounting, a straight forward, high-efficiency mounting fashion. In terms of its nominal supply current, this memory component is rated at 3mA. There must be at least an -40°C operating temperature for this device. The part should not be operated at temperatures above 85°C degrees Celsius as otherwise, the part may be damaged due to the excessive amount of heat. This memory ics should not be operated with a voltage below 1.8V volts at the minimum. Its operating voltage shall not exceed 5.5V. There is an 1MHz frequency with which this memory chip processes data. It is possible to run this memory at a maximum frequency of up to 1MHz.
AT24C64C-TH-B Features
Package / Case: 8-TSSOP (0.173, 4.40mm Width)
8 Pins
Operating Supply Voltage:3.6V
Freguency at 1MHz
1MHz terminals
AT24C64C-TH-B Applications
There are a lot of Microchip Technology AT24C64C-TH-B Memory applications.
- multimedia computers
- telecommunications
- personal digital assistants
- mainframes
- printers
- data buffer
- networks
- graphics card
- eSRAM
- DVD disk buffer
