AT24C512C1-10CI-2.7 Overview
Its memory type can be classified as Non-Volatile. It is supplied votage within Tube. As you can see, it is embedded in 8-TDFN case. A memory chip with a capacity of 512Kb 64K x 8 is used on this device. This device utilizes a EEPROM format memory which is of mainstream design. Due to its extended operating temperature range, the device is well suited for a wide range of demanding applications. The device is capable of handling a supply voltage of 2.7V~5.5V. Its recommended mounting type is Surface Mount. It is important to note that the memory has a clock frequency rotation within the range of 1MHz. When choosing similar parts, AT24C512C is frequently referred to as the device's base part number. The ic memory chip comes in a package with 8 pins that allows it to be connected to a computer. In this chip, Surface Mount mounting is used, a straightforward, high-efficiency mounting method. It is rated for a nominal supply current of 3mA for this memory component. The minimum operating temperature of this device must not be less than -40°C. The part should not be operated at temperatures above 85°C degrees Celsius as otherwise, the part may be damaged due to the excessive amount of heat. This part should have a minimum supply voltage of at least 2.7V volts in order to function correctly. A maximum voltage of 5.5V shall be allowed for its operating voltage. As a result of the frequency of this memory chip, data can be processed at a rate of 1MHz. This ic memory chip runs at a maximum frequency up to 400kHz.
AT24C512C1-10CI-2.7 Features
Package / Case: 8-TDFN
8 Pins
Freguency at 1MHz
1MHz terminals
AT24C512C1-10CI-2.7 Applications
There are a lot of Microchip Technology AT24C512C1-10CI-2.7 Memory applications.
- eDRAM
- main computer memory
- mainframes
- networks
- networking
- personal computers
- nonvolatile BIOS memory
- servers
- hard disk drive (HDD)
- telecommunications
