AT24C512B-TH25-B Overview
There is a Non-Volatile memory type associated with this device. The case comes in Tube size. In the case of 8-TSSOP (0.173, 4.40mm Width), it is embedded within the case. This chip has an 512Kb 64K x 8 size of memory on it, so a lot of data can be stored on it. There is a EEPROM-format memory used in this device, which is the memory format used by mainstream devices. Due to its extended operating temperature range, the device is well suited for a wide range of demanding applications. A voltage of 2.5V~5.5V can be supplied to memory ics. The recommended mounting type for memory ics is Surface Mount. With a clock frequency of 1MHz, the memory rotates on its own. Similar parts are frequently selected using the ic memory chip's base part number, AT24C512. It is encased in an 8-pin package that contains this ic memory chip. It is noted that the operating supply voltage of this memory is 3.6V. Chips such as this one are mounted using Surface Mount mounting, a straightforward method of mounting that is effective. It is rated 3mA for its nominal supply current when it comes to the memory component. There must be at least an -40°C operating temperature for this device. Temperatures no higher than 85°C degrees Celsius are recommended for operation. If this part is to be used, the minimum supply voltage should not be less than 2.5V volts. Its operating voltage shall not exceed 5.5V. Data is processed by this memory ics at a frequency of 1MHz. As far as the maximum frequency of this memory is concerned, it can reach as high as 400kHz.
AT24C512B-TH25-B Features
Package / Case: 8-TSSOP (0.173, 4.40mm Width)
8 Pins
Operating Supply Voltage:3.6V
Freguency at 1MHz
1MHz terminals
AT24C512B-TH25-B Applications
There are a lot of Microchip Technology AT24C512B-TH25-B Memory applications.
- cell phones
- mainframes
- printers
- eSRAM
- servers
- networks
- DVD disk buffer
- data buffer
- embedded logic
- Camcorders
