AT24C02B-TH-B Overview
Its memory type can be classified as Non-Volatile. Tube-cases are available. As you can see, it is embedded in 8-TSSOP (0.173, 4.40mm Width) case. This chip has an 2Kb 256 x 8 size of memory on it, so a lot of data can be stored on it. Memory data is stored in EEPROM-format, which is common in mainstream devices. Due to its wide operating temperature range, this device can be used in a wide variety of demanding applications. With 1.8V~5.5V as the supply voltage, it is capable of handling memory ics. Its recommended mounting type is Surface Mount. During the rotation of the clock, the ic memory chip is set as 1MHz. It is common to select similar parts by referring to the device's base part number, AT24C02. There are 8 pins on the package of the memory device. There is a note indicating that this memory chip operates at an 5V volt supply voltage. It uses Surface Mount mounting, which is an efficient, straightforward mounting method. In terms of its nominal supply current, this memory component has a rating of 3mA. The minimum operating temperature of this device must not be less than -40°C. Temperatures no higher than 85°C degrees Celsius are recommended for operation. This memory ics requires a minimum voltage of 1.8V. In order for it to operate properly, its voltage should not exceed 5.5V. Using this memory chip, you will be able to process data at a speed of 400kHz times per second. The memory runs at a maximum frequency of up to 400kHz cycles per second.
AT24C02B-TH-B Features
Package / Case: 8-TSSOP (0.173, 4.40mm Width)
8 Pins
Operating Supply Voltage:5V
Freguency at 400kHz
400kHz terminals
AT24C02B-TH-B Applications
There are a lot of Microchip Technology AT24C02B-TH-B Memory applications.
- networks
- networking
- servers
- Camcorders
- embedded logic
- supercomputers
- main computer memory
- hard disk drive (HDD)
- eDRAM
- telecommunications
