AT24C02B-PU Overview
Non-Volatile is the type of memory it has. Case Tube is available. Embedded in the 8-DIP (0.300, 7.62mm) case, memory ics is a single file. This chip has an 2Kb 256 x 8 size of memory on it, so a lot of data can be stored on it. This device uses a EEPROM-format memory, which is of mainstream design. Due to its wide operating temperature range, this device can be used in a wide variety of demanding applications. The device is capable of handling a supply voltage of 1.8V~5.5V volts. It is recommended that the mounting type be Through Hole. The memory has a clock frequency rotation within 1MHz. When selecting similar parts for the ic memory chip, AT24C02 is often referred to. An 8-pin package is used to package this memory device. Using Through Hole mounting, this chip offers straightforward and high-efficiency mounting. There is a nominal supply current rating of 3mA for this memory component. A minimum operating temperature of -40°C must be met by this device. A temperature of no more than 85°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. The minimum supply voltage for this part should not be less than 1.8V. Its operating voltage shall not exceed 5.5V. As a result of the frequency of this memory chip, data can be processed at a rate of 1MHz. In terms of speed, this memory can operate at a maximum frequency of 400kHz.
AT24C02B-PU Features
Package / Case: 8-DIP (0.300, 7.62mm)
8 Pins
Freguency at 1MHz
1MHz terminals
AT24C02B-PU Applications
There are a lot of Microchip Technology AT24C02B-PU Memory applications.
- eSRAM
- nonvolatile BIOS memory
- eDRAM
- graphics card
- networking
- hard disk drive (HDD)
- mainframes
- workstations,
- DVD disk buffer
- cell phones
