24VL014HT/ST Overview
A Non-Volatile-type memory can be classified as the memory type of this device. You can get memory ics in a Tape & Reel (TR) case. Embedded in the 8-TSSOP (0.173, 4.40mm Width) case, memory ics is a single file. There is an 1Kb 128 x 8 memory capacity on the chip. Memory data is stored in EEPROM-format, which is common in mainstream devices. This device has an extended operating temperature range of -20°C~85°C TA, so it's perfect for a wide range of demanding applications. A voltage of 1.5V~3.6V can be supplied to memory ics. As far as the mounting type is concerned, Surface Mount is recommended. As you can see from the diagram, the chip is planted with 8 terminations. For a comprehensive working procedure, this part supports as many as 1 functions. The memory device is designed to be supplied with an 1.8V volt power supply in order to operate properly. In order to operate effectively, the memory rotates at a clock frequency within a range of 400kHz. When choosing similar parts, 24VL014H is frequently referred to as the device's base part number. An 8-pin package is used to package this memory device. It has 8 pins indicating it has 8 memory locations. There is a note stating that this memory chip operates at 3.3V. This chip is configured to use Surface Mount mounting, a straight forward, high-efficiency mounting fashion. As far as its nominal supply current is concerned, this memory component carries a rating of 3mA. A I2C-type serial bus is used to carry and transfer data to the CPU through this memory.
24VL014HT/ST Features
Package / Case: 8-TSSOP (0.173, 4.40mm Width)
8 Pins
Operating Supply Voltage:3.3V
24VL014HT/ST Applications
There are a lot of Microchip Technology 24VL014HT/ST Memory applications.
- eDRAM
- printers
- networking
- servers
- hard disk drive (HDD)
- workstations,
- embedded logic
- supercomputers
- personal computers
- graphics card
