24LC1025T-I/SN Overview
As far as its memory type goes, it falls into the Non-Volatile category. Tape & Reel (TR)-cases are available. Embedded in the 8-SOIC (0.154, 3.90mm Width) case, memory ics is a single file. A memory chip with a capacity of 1Mb 128K x 8 is used on this device. Memory data is stored in EEPROM-format, which is common in mainstream devices. Due to its extended operating temperature range, the device is well suited for a wide range of demanding applications. A voltage of 2.5V~5.5V can be supplied to memory ics. Its recommended mounting type is Surface Mount. On the chip, there are 8 terminations. The part supports at least 1 functions to ensure a comprehensive working process. In order to function properly, this ic memory chip should be powered by a voltage of 3V. It is important to note that the memory has a clock frequency rotation within the range of 400kHz. A device's base part number, 24LC1025, is often used in order to identify similar components. This memory device is enclosed in a 8-pin package. The memory device has a total of 8 pins, thus indicating that it has a total of 8 memory locations. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. It is rated for a nominal supply current of 5mA for this memory component. In spite of all the merits this chip has, it also features 200 YEARS DATA RETENTION to level up system performance. There is only a single power supply required for this memory chip. By integrating with the I2C-type serial bus, this memory transmits data to the processor.
24LC1025T-I/SN Features
Package / Case: 8-SOIC (0.154, 3.90mm Width)
8 Pins
Additional Feature:200 YEARS DATA RETENTION
24LC1025T-I/SN Applications
There are a lot of Microchip Technology 24LC1025T-I/SN Memory applications.
- nonvolatile BIOS memory
- Camcorders
- cell phones
- servers
- hard disk drive (HDD)
- telecommunications
- personal digital assistants
- networking
- printers
- supercomputers
