24AA32AXT-I/ST Overview
Non-Volatile is the type of memory it has. It comes in a Tape & Reel (TR). As you can see, it is embedded in 8-TSSOP (0.173, 4.40mm Width) case. It is estimated that the memory size on the chip is 32Kb 4K x 8. Memory data is stored in EEPROM-format, which is common in mainstream devices. A wide operating temperature range makes this device ideal for a variety of demanding applications. With 1.8V~5.5V as the supply voltage, it is capable of handling memory ics. It is recommended that the mounting type be Surface Mount. The chip has 8 terminations. In total, this part supports 1 functions. In order to operate this memory device, it must be supplied with 2.5V of power. In the memory, there is a clock frequency rotation that ranges 400kHz. Similar parts are frequently selected using 24AA32A, the device's base part number. A 8-pin package containing this memory device is used to house this device. There are 8 pins on this memory device, which indicates it has 8 memory locations in it. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. Memory chip's nominal supply current is 3mA. This chip is not only loaded with advantages, but it also comes with 2-WIRE SERIAL INTERFACE; DATA RETENTION > 200 YEARS; 1000000 ERASE/WRITE CYCLES GUARANTEED, which boosts the performance of your system. In terms of power requirements, this memory chip uses only 2/5V . It is helpful to carry data to the CPU using the I2C-type serial bus that this memory integrates with.
24AA32AXT-I/ST Features
Package / Case: 8-TSSOP (0.173, 4.40mm Width)
8 Pins
Additional Feature:2-WIRE SERIAL INTERFACE; DATA RETENTION > 200 YEARS; 1000000 ERASE/WRITE CYCLES GUARANTEED
24AA32AXT-I/ST Applications
There are a lot of Microchip Technology 24AA32AXT-I/ST Memory applications.
- hard disk drive (HDD)
- printers
- workstations,
- data buffer
- graphics card
- embedded logic
- personal digital assistants
- networking
- Camcorders
- supercomputers
