11AA080-I/SN Overview
There is a Non-Volatile memory type associated with this device. It comes in a Tube. The case is embedded in 8-SOIC (0.154, 3.90mm Width). There is 8Kb 1K x 8 of memory on the chip. EEPROM-format memory is used in this device, which is a mainstream design. Due to its extended operating temperature range, the device is well suited for a wide range of demanding applications. A voltage of 1.8V~5.5V can be supplied to memory ics. Its recommended mounting type is Surface Mount. It has a clock frequency of 100kHz. When selecting similar parts for the ic memory chip, 11AA080 is often referred to. There are 8 pins on the package of the memory device. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. In terms of its nominal supply current, this memory component has a rating of 5mA. A minimum operating temperature of -40°C must be met by this device. It is recommended that operation of the part be restricted to temperatures not exceeding 85°C, otherwise damage to the part may occur as a result of overheating. This memory ics requires a minimum voltage of 1.8V. The operating voltage shall not exceed 5.5V. A frequency of 100kHz is used to process the data on this memory chip. There is a maximum frequency of up to 100kHz for this memory.
11AA080-I/SN Features
Package / Case: 8-SOIC (0.154, 3.90mm Width)
8 Pins
Freguency at 100kHz
100kHz terminals
11AA080-I/SN Applications
There are a lot of Microchip Technology 11AA080-I/SN Memory applications.
- nonvolatile BIOS memory
- mainframes
- personal digital assistants
- telecommunications
- Cache memory
- servers
- hard disk drive (HDD)
- embedded logic
- graphics card
- multimedia computers
