MIC2940A5.0BUTR Overview
The package contains a Tape and Reel case. Packaged in a TO-263-4 case, the battery regulator IC is protected from damage during shipment. As part of this electrical component, 1 regulators are implemented. There is a current output of 1.25A from this regulator IC. In order to ensure prompt, adequate, and prompt performance, this regulator has 1 outputs in total. A dropout voltage of 10 volts can be obtained from this voltage regulator IC. It operates in the 500μA Quiescent Current state. When the temperature is below 125°C, you are advised to use the voltage regulator IC. During the operation of the chip, the chip's operating temperature is not less than -40°C degrees. As a general rule, this regulator IC outputs 5V volts on a system basis.
MIC2940A5.0BUTR Features
400mV dropout voltage
The maximum operating temperature of -40°C
MIC2940A5.0BUTR Applications
There are a lot of Micrel MIC2940A5.0BUTR Linear Voltage Regulators applications.
- Dashboards
- Voltage tracker protection circuits
- Servers
- Personal communication device
- Car lighting
- PLL (Phase-Locked Loop)
- DSP power
- Low Noise Instrumentation
- Switching regulator
- EPS (Electric Power Steering)
