MXL1013CN8+ Overview
It is packaged in an PDIP-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 450μV for input offset voltage. There should be no change in the voltage gain at 120dB. There are a total of 2 channels available on the op amps. This instrumentation amplifier cannot operate below 0°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 70°C. It is important to keep in mind that the power supply voltage of this electric component is below 44V, which is suitable. In order to conduct this part, you will need to provide dual supply voltages of 22V volts.
MXL1013CN8+ Features
8 Pins
supply voltage of 15V
120dB voltage gain
MXL1013CN8+ Applications
There are a lot of Maxim Integrated
MXL1013CN8+ Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
