MXD1813UR46+T Overview
This power management consists of 3 mounting terminals on which it can be mounted. Power management is packaged in a Tape & Reel (TR) way. Please find attached 1 functions for your reference in this IC power. A series of 1 channels can be found on this supervisor. In this PMIC, you can find TO-236-3, SC-59, SOT-23-3 functions for your reference. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. The supervisor is always powered by a 3.6V volt supply. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by a Surface Mount-axis. There is a subcategory of this power ic known as Power Management Circuits. In total, it has 3 pins on IC management. 3 pins are present on the power management system. It is recommended that Vsup should not be less than 1V for this IC power. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: -40°C~105°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. The supervisor's supply current is specified to 9μA. You can always use MXD1813, the base supervisor number, to search for similar PMICs of the manufacturer.
MXD1813UR46+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
9μA operating supply current
MXD1813UR46+T Applications
There are a lot of Maxim Integrated MXD1813UR46+T Voltage Supervisors applications.
- Display equipment
- Rechargeable batteries
- Smartphones
- Insulation fault location system
- Fire equipment power monitoring system
- Efficient information transmission
- Power communication system
- DC stabilized power supply module
- Electronics installed in the vehicle
- Radar
