MXD1810XR46+T Overview
There are 3 mounting terminals on the voltage supervisor, each of which has a different function. It is packaged with Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. Power management consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of SC-70, SOT-323 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Packages are specified to have an average peak reflow temperature of 260. IC management conducts at a voltage of 3.6V. In a 1 supply voltage, the PMIC chip conducts. Using Surface Mount, IC management is mounted. A IC power such as this can be classified as a Power Management Circuits power management system. In total, IC powers are 3 pins on the board. 3 pins are present on the power management system. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The mounting type of the supervisors is Surface MountThis range of temperature should be set for the supervisors: -40°C~105°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. The supervisor's supply current is specified to 9μA. A similar IC managements number of the manufacturer can always be found by using MXD1810, the base power ics number.
MXD1810XR46+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
9μA operating supply current
MXD1810XR46+T Applications
There are a lot of Maxim Integrated MXD1810XR46+T Voltage Supervisors applications.
- External alarm
- Utility meter
- Transformer load monitoring equipment
- Important electronics for automotive safety
- Telecommunications equipment
- Radio
- Smart meter
- Rechargeable batteries
- Household appliances
- Electronics installed in the vehicle
