MAX994ESD+ Overview
In order to make transportation easier, it is packaged in 14-SOIC (0.154, 3.90mm Width) .Output type CMOS, Open-Drain, Rail-to-Rail, TTL is used for this comparator.This device is designed in Tube case.There are 14 terminals on the comparator.The electrical component in this case belongs to the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.In terms of type, this is a typical General Purpose comparator.The total number of elements is 4 .As a result, it contains 14 pins.A Surface Mount mounting type is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.The comparator is equipped with 14 pins.Try search MAX994 to get more pin-to-pin solutions for your special needs.A quiescent current of 24μA is observed in this comparator.There is a Surface Mount for mounting it on a PCB or other board.For normal use of the device, the nominal supply current should be 80μA .A current supply greater than 80μA may result in the comparator malfunctioning.In order to run the device, there are only +-1.5/+-2.5/3/5V power supplies required.
MAX994ESD+ Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 24μA
MAX994ESD+ Applications
There are a lot of Maxim Integrated MAX994ESD+ linear comparators applications.
- Wide Range VCO; MOS Clock Timers
- Battery management and protection
- Mobile Communications
- Battery-Powered Electronics
- Self-diagnostics
- General-Purpose Portable Devices
- Pulse, Squarewave, and Time Delay Generators
- Analog front end
- Mobile Phones and Tablets
- Wearable Devices
