MAX9621AUB+ Overview
There are materials in the package from Tube.10-TFSOP, 10-MSOP (0.118, 3.00mm Width) pacakge is used for space saving.This type of Hall Effect Sensor is capable of providing superior performance.As a mounting method, Surface Mount is employed.A temperature of -40°C~125°C should be maintained during operation to avoid unnecessary cooling.As an input type, it uses Logic.In order to prevent signals from reflecting off the end of the transmission line, 10 terminations are used.According to its base part number of MAX9621, related electronic components can be found.This device is configured with 1 functions.The voltage supply is 13.6V.Basically, it is an electronic device with 10-pins.Mounted in the direction of Surface Mount.The output type is Analog, Digital.When the operating supply current is maintained at 1mA, improved efficiency can be achieved.When the supply voltage is exceeded by 18V, failures will occur.Sensor and detector interface is likely that the supply voltage will be below 5.5V at the time of failure.The output current of -1.4mA can be controlled by this device.
MAX9621AUB+ Features
With 13.6V channels
operate temperature at the range of 1mA
MAX9621AUB+ Applications
There are a lot of Maxim Integrated MAX9621AUB+ applications of sensor and detector interfaces.
- Automotive, aircraft, marine and industrial control
- Motion Triggered Events (Animal photography)
- Motor drive controllers
- Transducers and Transmitters
- Zero Crossing Switch
- Level transmitter
- Landing Assistance for Drones
- Large Tank Level Sensing
- Mobile Devices
- Electric Sunroofs
