MAX9501EEE+T Overview
Packaged in a 16-SSOP (0.154, 3.90mm Width) package, it is easy to install.Packaged in a Tape & Reel (TR) format, it is a very good product.In the case of this gadget, the mounting type is Surface Mount.The filter type for this part is Low Pass.With a power source of ±4.5V~5.5V, it should work.16-pins are present on both sides of the device.Filter is important to point out that the best component of the device is the MAX9501.In terms of frequency, it is at a cutoff or center frequency of 30MHz.As the reflow temperature reaches 260, it reaches its peak.During all periods of operation, 5V is used as a source of power for the component.As soon as you start the machine, it should be warmer than -40°C.In the current state of affairs, 85°C represents the maximum working temperature.Filter is important to remember that 16 is the pin number of the component.As you can see from the picture, there are a number of 16 terminals on the device.In 3 circuits, there are various types of circuits.This is one of a number of Surface Mount mount packages that are included with the package.A DC DC switching regulator, in this case, operates by operating on a supply voltage of 5V.As far as the part type is concerned, it is of the Active type.
MAX9501EEE+T Features
Supply voltage of 5V
Maximum operating temperature of 85°C
3 circuits
Mount of Surface Mount
MAX9501EEE+T Applications
There are a lot of Maxim Integrated
MAX9501EEE+T active filters applications.
- Sample Rate Converters
- Digital Down Conversion
- D/A and A/D pre/post Filtering
- Tuning Bandwidth Expansion for HSP45116 and HSP45106
- Quadrature, Complex Flterlng
- Image Processing
- Polyphase Flterng
- Adaptive Fllterlng
- Very Narrow Band Fllters
- Zoom Spectral Analysis
