MAX942EUA+ Overview
The product is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) to facilitate transportation.A comparator with a CMOS, Push-Pull, TTL output is used here.Electronic comparator is shipped by Tube .The comparator has 8 terminals.Electronic comparator is a component of the Comparators family.Supplied by 3V voltage, the comparator can accomplish the many demanding tasks.The type of the chip can be classified as General Purpose .The total number of elements is 2 .The device is equipped with 8 pins.Electronic comparator is recommended to mount using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .The comparator has a pin count of 8 .You can search MAX942 if you are looking for more pin-to-pin solutions.In this comparator, the quiescent current is 600μA .There is a Surface Mount for mounting it on a PCB or other board.Electronic comparator is recommended that the nominal supply current be 500μA in order to use the device normally.A current supply greater than 500μA may result in the comparator malfunctioning.Electronic comparator is possible to input a maximum of 150nA current into the device.In order to operate normally, a supply voltage of 0 is required.
MAX942EUA+ Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 600μA
MAX942EUA+ Applications
There are a lot of Maxim Integrated MAX942EUA+ linear comparators applications.
- Multivibrators and High-Voltage Digital Logic Gates
- Infotainment & cluster
- Notebooks and PDAs
- DC/DC and AC/DC power supplies
- Alarm and Monitoring Circuits
- Hand-Held Electronics
- Portable and Battery-Powered Systems
- Handheld Instruments
- Lithium ion battery monitoring
- Power management
