MAX941EPA+ Overview
For convenience, it is packaged in 8-DIP (0.300, 7.62mm) .There is a CMOS, Push-Pull, TTL output type for this comparator.Electronic comparator is shipped by Tube .The comparator has a total of 8 terminals.The electrical component here belongs to the Comparator family.With a 3V voltage supply, the comparator can perform multiple demanding tasks.The type of the chip can be classified as with Latch, Shutdown .Electronic comparator consists of 1 elements in total.Electronic comparator has 8 pins.The recommended mounting method is Through Hole .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.The comparator has a pin count of 8 .You can find more pin-to-pin solutions by searching MAX941 .As a result, this comparator displays a quiescent current of 700μA .This component has a Through Hole mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 600μA when using the device.A supply current exceeding 600μA may result in the comparator malfunctioning.There is sufficient power to run the device from 3/5V power supplies.You can input a maximum current of 150nA into this device.
MAX941EPA+ Features
CMOS, Push-Pull, TTL output capability
with Latch, Shutdown IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 700μA
MAX941EPA+ Applications
There are a lot of Maxim Integrated
MAX941EPA+ linear comparators applications.
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
