MAX9322ECY+D Overview
The clock divider is available in 52-TQFP case. Tray is the form in which it is packaged. For normal operation, 1GHz is the maximum value. A total of 52 terminations can be found in it. With a supply voltage of 3.3V, high efficiency is possible. If this is the case, it will be mounted as Surface Mount. This electronic part is classified as Clock/Data Driver. Setting the temperature to -40°C~85°C will ensure reliable performance. The clock switch should operate with a voltage of 2.375V~3.8VV. As a result, it is placed in the way of Surface Mount. There are 52 pins on the clock buffer. There is an output of LVECL, LVPECL. For operation, 52 pins are used. There is a cut smart buffer contained in Clock Drivers that is used for this purpose. A member of the 9322 family, this clock buffer is a digital camera. The maximum supply voltage (Vsup) is set to 3.8V. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 2.375V. A power supply of +-2.375/+-3.8V volts powers it. You can also get LVECL MODE OPERATING RANGE IS -2.375V TO -3.8V when you use this gadget.
MAX9322ECY+D Features
52 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory
MAX9322ECY+D Applications
There are a lot of Maxim Integrated MAX9322ECY+D Clock Buffers & Drivers applications.
- Hardware accelerator
- Zero crossing detector
- FPGA
- High-end consumer electronics
- Line receiver and signal recovery
- Fibre channel (FC)
- Oscilloscope and logic analyzer front ends
- OTN
- Mobile Internet Device (MID)
- Switch
