MAX9320BEUA+ Overview
As far as the case type is concerned, the cut smart buffer is available in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). In case Tube, the cut smart buffer is available. Normal operation has a maximum value of 3GHz. A total of 8 terminations are present. High efficiency is feasible with a supply voltage of 5V. As far as I can tell, it is mounted by Surface Mount. Electronic components classified as Fanout Buffer (Distribution), Data fall into this category. It is recommended to set the temperature to -40°C~85°C in order to achieve reliable performance. In general, it should be able to work with a power source of 3V~5.5V volts. It has a number of pins of 8. The output of it is ECL, PECL, LVECL, LVPECL. This is set to 5.5V for the maximum supply voltage. As a rule, the supply voltage (Vsup) should be kept above 3V for normal operation. With the help of this gadget, ECL/LVECL MODE: VCC = 0 V WITH VEE = -3 V TO -5.5 V can also be obtained.
MAX9320BEUA+ Features
8 terminations
The operating temperature of -40°C~85°C degrees
MAX9320BEUA+ Applications
There are a lot of Maxim Integrated MAX9320BEUA+ Clock Buffers & Drivers applications.
- Wired communication field
- Aviation
- High-end consumer electronics
- High-performance workstation
- Information equipment
- OTN
- Ultra Mobile PC (UMPC)
- Base station
- Other PCIe Gen2 networking applications
- Synchronous digital system
