MAX9141ESA+ Overview
For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .There is a CMOS, Push-Pull, TTL output type for this comparator.Electronic comparator is shipped by Tube .The comparator has a total of 8 terminals.The electrical component here belongs to the Comparators family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.The type of the chip can be classified as with Latch .Electronic comparator consists of 1 elements in total.Electronic comparator has 8 pins.The recommended mounting method is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.The comparator has a pin count of 8 .You can find more pin-to-pin solutions by searching MAX9141 .As a result, this comparator displays a quiescent current of 320μA .This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 200μA when using the device.A supply current exceeding 200μA may result in the comparator malfunctioning.There is sufficient power to run the device from 3/5V power supplies.You can input a maximum current of 320nA into this device.
MAX9141ESA+ Features
CMOS, Push-Pull, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 320μA
MAX9141ESA+ Applications
There are a lot of Maxim Integrated
MAX9141ESA+ linear comparators applications.
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
